How to print your cards
A complete guide to getting the best results at home or at a print shop.
1 · Basic instructions
The cards are provided in PDF format, making it easy to group them by paper size (A4 and Letter). This ensures you can print them without losing image quality. The cards have also been designed with a color profile that helps save ink, especially when printing on a personal printer.
For the best printing results, follow these steps:
- Step 1: Choose your preferred paper size, A4 or Letter. Make sure your printer is set to double-sided printing and the page is printed at 100%. Disable "Fit to page". Printing at the correct scale is essential for the cards to have the right size and alignment.
- Step 2: For clean, precise cuts, you will need a cutting mat, a craft knife or X-Acto-style knife, and a metal or wooden ruler (avoid plastic rulers).
-
Step 3: Use the crop marks (important). Each card includes marks that let you choose your preferred finish. Take your time when cutting. Precision here makes a noticeable difference:
- Cut along the outer marks to create a perfectly straight rectangular card.
- Trim inside the corner marks for a slightly rounded, more professional finish.
Optional finishes: Use a corner rounder for smoother edges. Sleeve or laminate the cards for greater durability.
| Printing at home | Printing at a print shop | |
|---|---|---|
| 1 | Download the PDFs | Files in A4 or Letter format |
| 2 | 160–200 gsm paper | White matte paper > 300 gsm |
| 3 | Select A4 or Letter size | Double-sided printing |
| 4 | Print at 100% scale, double-sided | Cut out the cards |
| 5 | Cut out the cards | See the section on color profiles |
| 6 | (Optional) Round the corners | (Optional) Gloss finish |
| 7 | (Optional) Sleeve the cards | (Optional) Lamination |
2 · Printing and quality
- For the best results, use the highest print quality setting available on your printer (usually called Best quality, High quality or Photo quality).
- If your printer offers borderless printing, leave it disabled unless needed. Borderless printing may slightly enlarge the design and affect card alignment.
- Request printing at 100% scale without automatic resizing. Ask the print shop not to apply automatic image enhancements, color corrections, or scaling unless you specifically want them.
- Colors may vary depending on the printer, paper type, monitor calibration, and ink or toner used. Home printers tend to produce slightly different colors from professional print shops. This is normal and does not indicate a problem with the files.
- The card files are prepared with a CMYK color profile, the standard for professional printing. Some printer drivers internally convert CMYK to RGB before processing. This is normal and does not significantly affect the printed result.
- The editable PDF forms use an RGB color profile. This is intentional: the software used to create them requires RGB to ensure that all editable text fields are consistently aligned across all cards. Home printers and office laser printers handle RGB files without problems, automatically converting them when printing. If you take the forms to a print shop, let the technician know that those specific files are in RGB so they can manage the conversion correctly.
- For the most accurate colors, print a test page before printing the full set.
3 · Paper recommendations
At home
- The safe range for most home printers is 160–200 gsm. Before choosing your paper, check the paper weight supported by your printer and its double-sided printing function. You can consider 160–200 g/m² paper if your model supports it. Exceeding this weight without checking your model’s specifications can cause paper jams.
- Use matte paper if you want cards that do not reflect light and have a more professional appearance. Glossy photo paper produces more vivid colors, but it is more slippery and harder to cut precisely.
- Avoid textured recycled paper: cut edges will be uneven and colors will print less accurately.
At a print shop
- Request 300–350 gsm matte coated paper. This is the standard for card games.
- If you request a gloss finish, bear in mind that black may look deeper, but light colors lose detail under lighting. Matte is the safest choice for cards with text or fine details.
4 · Double-sided printing
- Before printing the entire file, print a test sheet to check your printer’s duplex orientation. Each model flips the paper differently (long edge vs short edge). A test print can prevent misaligned fronts and backs across the entire set.
- If your printer does not support automatic double-sided printing, print all the fronts first, then reinsert the sheets according to your model’s paper feed direction.
- A 1–2 mm misalignment is normal on home printers. The crop marks are designed with a safety margin that accommodates this tolerance.
- Manual feed: Use the manual feed or bypass tray (if your printer has one) instead of the lower tray. Wait 2 minutes for the ink to dry completely before reinserting the sheets. Allow the ink to dry completely before feeding the sheets back in. The time required depends on the paper, the ink, and the amount of ink applied. This keeps the paper straighter and reduces the margin of error in double-sided printing.
Flip orientation (important)
- If your printer has automatic duplex printing, select "Flip on long edge" when printing in portrait orientation.
- If you flip the paper manually, make sure you turn it along the correct axis for your printer’s mechanism so the back is not upside down. We recommend testing with two pages on plain paper first.
Page centering
Make sure the "Center page" option is enabled in your PDF reader’s print settings (such as Adobe Acrobat). This ensures that the axis of symmetry is identical on the front and back of each card.
5 · Cutting and finishing
Understanding the crop marks
Your PDF includes two sets of specialized alignment marks at the corners of each card. Decide which finish you prefer before making the first cut.

Tools and preparation
For crisp, professional-quality edges, you will need:
- A cutting mat that is self-healing.
- A craft knife or X-Acto-style knife with a sharp blade (safer and more precise than scissors).
- A metal or wooden ruler (avoid plastic rulers. The blade can slip along the edge and ruin the cutting line).
Using the crop marks
Each sheet includes specialized alignment marks for your preferred finish. Take your time. Precision here makes all the difference.
- Straight edges: Align your ruler with the outer crop marks and cut from end to end to create perfectly rectangular cards.
- Rounded edges: Trim slightly inside the inner corner guides for a smoother, rounded finish.
- Professional finish (optional): Use a corner rounder (available at craft stores) for perfectly uniform corners, and use sleeves or lamination for maximum durability during play.
Making the cut
When cutting several cards from the same sheet, do not cut the paper from edge to edge on the first pass. If you cut all the way through, you will remove the alignment marks for the remaining cards.
- Pressure: Do not try to cut thick cardstock (>200 gsm) in a single pass. Applying too much pressure can cause the ruler to slip or the paper to tear. Use several gentle passes instead.
Place the ruler over the crop marks, start cutting inside the edge of the paper (right where the card edge begins), and stop before the opposite edge. Leave the outer margins intact as a "frame" until the final cut.
6 · Adding extra cutting guides
A customer gave me this idea, and I took it into consideration. I still think that fewer cuts can mean a higher chance of cutting errors. However, with the right tools, that does not have to be the case. I have created a PDF to overlay onto the files you want to print with extra guides.
I decided to create them in Cyan and White. Cyan is the industry standard for crop marks. Print shops use it precisely because it does not visually interfere with the content and almost completely disappears on most white papers.
One thing to bear in mind: pure cyan in CMYK is 100C 0M 0Y 0K. However, when overlaid onto another PDF on some home printers, it can look slightly greenish depending on the printer’s color profile. That is why I adjusted it to 85C 10M 0Y 0K for a cleaner result on inkjet printers.
You can find the guides I created here.
Once again, the tool to use is PDF24. Simply select the PDF you want to add the new layer to and the PDF to overlay. For the position, select "Foreground" so it overlays correctly, and leave the continuous option checked so it applies to all pages, not just the first one.

7 · Printer compatibility
These files have been designed to print correctly on both home and professional printers. However, final results may vary depending on the printer model, paper type, ink or toner, and settings used. Bear the following in mind:
Inkjet printers generally produce more vivid colors, although saturation may vary depending on the paper type and print quality selected.
Ideal for printing at home. To prevent thick paper from absorbing too much ink and warping or smudging, select High or Photo quality in the print settings and choose the correct paper type (for example, Heavyweight matte). Allow the sheets to dry for 5 to 10 minutes before flipping or cutting them.
Models such as the Epson EcoTank or Canon PIXMA Pro offer a wider color range, sharper edges, and better compatibility with thicker papers up to 300 gsm. The closest result to professional printing from home.
These produce a stiffer, satin finish. It is essential to set the paper type in the printer driver to Thick paper, Cardstock, or Heavyweight (depending on the gsm used). If the default setting ("Plain paper") is left selected, the toner will not receive enough heat and may flake off when you cut the cards.
Some laser printers may reproduce light background colors (such as parchment, beige, or cream tones) darker than expected. This can reduce the contrast between the background and text, especially when using toner-saving or draft quality settings.
Office printers tend to prioritize speed and toner savings over color accuracy, which can affect the appearance of the cards. Professional printers generally offer the most consistent color reproduction and the best print quality.
Color management
- In Adobe Acrobat Reader: File → Print → Advanced → uncheck "Let printer determine colors".
- The cards have been designed to avoid pure solid black backgrounds (100% K), which use a lot of ink and can bleed on thin paper. If your printer has an economy mode, do not enable it. It reduces ink density and makes colors less consistent.
If the text is hard to read or the colors look darker than expected
- Disable any toner-saving, eco, or draft mode.
- Select the highest print quality setting available.
- Make sure the correct paper type is selected in the printer settings.
- Print a test page before printing the full set.
Color reproduction will always vary slightly between printers, papers, inks, toners, and monitors. Small differences in color appearance are normal and do not indicate a problem with the files.
8 · Troubleshooting
- If the cards look too large or too small, check that the scale is set to 100% and that Fit to page, Shrink to fit or similar options are disabled.
- If the front and back do not align correctly, check the printer’s scaling settings and do a test print before printing the full set.
- If the colors look dull, check that the correct paper type is selected in the printer settings.
- If the black areas look gray or faded, increase the print quality setting or use new ink or toner cartridges.
Laser printers: dark backgrounds and low text contrast Laser only
Laser printers use heat to fuse the toner, which can oversaturate dark tones, "flatten" textured backgrounds (such as parchment effects), and make dark gray text difficult to read. If this happens, adjust the following settings in your printer properties:
- Change the print mode to "Graphics" or "Photos": Avoid "Standard" or "Office documents". Photo mode uses a finer halftone pattern, keeping parchment details soft and small text crisp.
- Disable "Toner saving" mode: This mode creates a grid of empty dots to save toner, ruining the definition of fine text and making text on colored backgrounds illegible.
- Brightness adjustment: If your printer driver allows color adjustments, increase Brightness by +5% to +10%. This lightens the background texture without fading the text.
Inkjet printers: bleeding and drying
- Print quality: Set the quality to High or Photo.
- Drying time: Heavy ink coverage on cardstock needs time to cure. Allow the pages to dry for 5 to 10 minutes before flipping or attempting to cut them, to avoid smudges.